show tunnel-mgr

Displays detailed information about active tunnels managed by the RUCKUS Edge device.
Syntax
show tunnel-mgr
Modes

Advanced mode. - Network

The show tunnel-mgr command displays the following information.

Output field Description
Output field description required
Tunnel-Id Displays the local tunnel ID.
Peer SerialId Displays the serial number of the peer device in the tunnel.
peertunnelid Displays the tunnel ID of the peer device.
rmt  
nat true rmt_port  
lcl  
lcl_port  
vni  
tunnel_id  
peer_tunnel_id  
nat_flag true remote_nat_port  
fib-idx  
sw-if-idx  
user  
pmtu-user-type  
pmtu-user-inst  
pmtu  
ff no decap-next-protocol  
Usage Guidelines

This command is supported only on the RUCKUS Edge device. The output includes tunnel IDs, peer serial IDs, local and remote IP addresses and ports, NAT status, VNI, PMTU configuration, and protocol type. This information is useful for debugging and verifying tunnel state and configuration on the RUCKUS Edge device.

Examples

The following example displays the information managed by the Tunnel Manager, including the Edge device tunnel ID, the serial number of the peer device, the peer AP tunnel ID, local and remote IP addresses, NAT flag status, and UDP remote port number.

vpp# show tunnel-mgr
Tunnel-Id: 1
Peer SerialId: 3923395001100000000000000000000000
peertunnelid 1 lcl 168.56.2.16 rmt 168.56.1.2 nat true rmt_port 4790
[0] lcl 168.56.2.16 rmt 168.56.1.2 lcl_port 4790 rmt_port 4790 vni 16777215 tunnel_id 1 peer_tunnel_id 1 nat_flag true remote_nat_port 4790 fib-idx 0 sw-if-idx 6 user 2 pmtu-user-type 2 pmtu-user-inst 2 pmtu 1450 ff no decap-next-protocol rshim-ka
[1] lcl 168.56.2.16 rmt 168.56.1.2 lcl_port 4790 rmt_port 4790 vni 1002 tunnel_id 1 peer_tunnel_id 1 nat_flag true remote_nat_port 4790 fib-idx 0 sw-if-idx 7 user 1 pmtu-user-type 2 pmtu-user-inst 2 pmtu 1450 ff no decap-next-protocol ethernet
 
History
Release version Command history
2.4.0 This command was introduced.