show rgre tunnels

Displays detailed information about RUCKUS GRE (RGRE) tunnels, with optional filters to narrow results by tunnel‑ID, source IP, destination IP, or tunnel type. Supports verbose output and pagination‑control options for large tunnel tables.
Syntax
show rgre tunnels [ filter tunnel-id id ] [ filter src ip ] [ filter dst ip ] [ filter type type ] [ verbose ] [ skip-page ] [ skip-tunnel n ]
Modes

Advanced mode

Network mode

filter tunnel-id id
Displays only tunnels matching the specified tunnel ID.
filter src ip
Displays tunnels with the specified source IP address.
filter dst ip
Displays tunnels with the specified destination IP address.
filter type type
Filter tunnels by RGRE tunnel type.
verbose
Displays extended and detailed tunnel information.
skip-page
Provides the entire tunnel list without interactive paging, useful for scripting or when many tunnels exist.
skip-tunnel n

Skips the first n tunnels in the display output.

The show rgre tunnels command displays the following information.

Output field Description
rgre tid Tunnel ID associated with the RGRE interface (for example, rgre 16381).
src / dst Source and destination IPv4 addresses for this RGRE tunnel.
udp Indicates whether RGRE‑over‑UDP is used (NAT‑T), and the UDP encapsulation state.
ready Indicates whether the tunnel is ready for data forwarding (1) or not (0).
sw-if Software interface index of the parent rgre interface.
type Tunnel type, for example, TEB for transparent Ethernet bridging.
pmtu Current Path MTU value learned from the AP keepalive or configuration.
ff Forced‑fragmentation flag.
When verbose is used, additional per‑tunnel details are shown, such as:
fib-idx / l2-adj-idx / tidx Internal FIB, adjacency, and tunnel indices.
ap-mac AP MAC address associated with this tunnel.
Created Time elapsed since this tunnel was created.
Counters RGRE keepalive receive success counters and tunnel bring‑up latencies.
Per Thread data Per‑worker keepalive state, last KA time, sequence number, and PMTU.
Examples
Display all tunnels:
DBGvpp# show rgre tunnels
RGRE tunnels:
rgre 16381 src 10.176.154.147 dst 10.176.154.142 udp 0 ready 1 sw-if 8 type TEB pmtu 1246 ff 0
rgre 16382 src 10.176.154.147 dst 10.174.69.118 udp 0 ready 1 sw-if 9 type TEB pmtu 1246 ff 0
Total tunnels displayed 2
Display full details:
DBGvpp# show rgre tunnels verbose
RGRE tunnels:
rgre 16381 src 10.176.154.147 dst 10.176.154.142 udp 0 ready 1 sw-if 8 type TEB pmtu 1246 ff 0
  point-to-point fib-idx 0 l2-adj-idx 11 tidx 0 ap-mac 0c:f4:d5:32:d8:c0
  Created: 1:14:59:56 (140396s) ago
  Counters:
    ka rx success        : 46707
    make tunnel ready ms : 1
  Per Thread data:
    wk0  KA rx 00:00:00 (0s) ago,  seq-no 0, pmtu 0
    wk1  KA rx 00:00:00 (0s) ago,  seq-no 92305, pmtu 1246
    wk2  KA rx 00:00:00 (0s) ago,  seq-no 0, pmtu 0
rgre 16382 src 10.176.154.147 dst 10.174.69.118 udp 0 ready 1 sw-if 9 type TEB pmtu 1246 ff 0
  point-to-point fib-idx 0 l2-adj-idx 12 tidx 1 ap-mac d8:38:fc:1e:b3:a0
  Created: 1:14:59:55 (140395s) ago
  Counters:
    ka rx success        : 42849
    make tunnel ready ms : 1
  Per Thread data:
    wk0  KA rx 00:00:00 (0s) ago,  seq-no 0, pmtu 0
    wk1  KA rx 00:00:01 (1s) ago,  seq-no 102631, pmtu 1246
    wk2  KA rx 00:00:00 (0s) ago,  seq-no 0, pmtu 0
Total tunnels displayed 2
Filter by tunnel ID:
DBGvpp# show rgre tunnels filter tunnel-id 16381 verbose
RGRE tunnels:
rgre 16381 src 10.176.154.147 dst 10.176.154.142 udp 0 ready 1 sw-if 8 type TEB pmtu 1246 ff 0
  point-to-point fib-idx 0 l2-adj-idx 11 tidx 0 ap-mac 0c:f4:d5:32:d8:c0
  Created: 1:14:59:56 (140396s) ago
  Counters:
    ka rx success        : 46707
    make tunnel ready ms : 1
  Per Thread data:
    wk1  KA rx 00:00:00 (0s) ago,  seq-no 92305, pmtu 1246
Total tunnels displayed 1
Filter by source IP:
DBGvpp# show rgre tunnels filter src 10.176.154.147
RGRE tunnels:
rgre 16381 src 10.176.154.147 dst 10.176.154.142 udp 0 ready 1 sw-if 8 type TEB pmtu 1246 ff 0
rgre 16382 src 10.176.154.147 dst 10.174.69.118 udp 0 ready 1 sw-if 9 type TEB pmtu 1246 ff 0
Total tunnels displayed 2
History
Release version Command history
2.5.0 This command was introduced.