Displaying Syslog Messages in RFC 5424 Format

If syslog logging specific to RFC 5424 is enabled, the show logging command displays the syslog messages generated in RFC 5424 format as shown in the following example.

device(config)# show logging
Syslog logging: enabled (RFC: 5424, 0 messages dropped, 1 flushes, 0 overruns)
    Buffer logging: level ACDMEINW, 12 messages logged
    level code: A=alert C=critical D=debugging M=emergency E=error
I=informational N=notification W=warning

Dynamic Log Buffer (4000 lines):
2023-10-31T19:11:45Z:I: ruckuswireless.com device ICX7850_Router - General [meta sequenceId=12] BOM MGMT Agent: Failed to connect to network controller at 10.177.86.160 Error:  
2023-10-31T19:09:10Z:I: ruckuswireless.com device ICX7850_Router - System [meta sequenceId=11] BOM COPY COMPLETED 
2023-10-31T19:09:10Z:I: ruckuswireless.com device ICX7850_Router - System [meta sequenceId=10] BOM Security: startup-config was changed  
2023-10-31T19:09:10Z:I: ruckuswireless.com device ICX7850_Router - System [meta sequenceId=9] BOM COPY_CONFIGURATION_TO_FLASH 
2023-10-31T19:09:10Z:I: ruckuswireless.com device ICX7850_Router - General [meta sequenceId=8] BOM Security: startup-config was changed by super from CONSOLE
.
.
.