Displaying IP Performance Metrics and Watcher Statistics

You can use various show commands to view information for IP Performance Metrics (IPPM) and watcher profiles.
Use one of the following commands to view IPPM and watcher information. Using these commands is optional and they can be entered in any order. For more information on these commands, refer to the RUCKUS FastIron Command Reference.
  1. Enter the show ippm profile command, and specify a profile, to display information for the specified IPPM profile. 
    device> show ippm profile p1

ippm profile p1 :
    type icmp-echo
    vrf               : default-vrf
    destination       : 10.8.8.8
    TTL               : min = 30, max = 40
    state             : InActive
    scheduled from 02-22-2023 21:10:22 for a duration of 180 secs at frequency of 30 secs
  2. Enter the show watcher command, and specify a watcher name, to display information for the specified watcher. 
    device> show watcher w1

watcher w1 :
  Result                : Up
  Action : 
    Logging for success : enabled
    Logging for failure : enabled
    Static-route        : enabled

  Module IPPM 
    profile             : ipsla
    frequency           : 60
    state               : Active
    Results             :(S-Success; F-Fail)
        TTL             : S 
        RTT             : S 
        JITTER          : S
  3. Enter the show watcher command with the detail keyword, and specify a watcher, to display information for the configured watcher including the latest five iterations of results.
    device> show watcher w1 detail

watcher w1 :
  Result                : Up
  Action :
    Logging for success : enabled
    Logging for failure : enabled
    Static-route        : disabled

  Module IPPM
    profile             : p1
    frequency           : 60
    state               : Active
    Results             :(S-Success; F-Fail)
    Latest 5 results  :
    TTL             : F  F  F  F  F
Parent topic: IP Performance Metrics Overview