IEEE Compliance
The following table lists the IEEE standards that are supported on the RUCKUS ICX platforms. Footnotes indicate exceptions.
| IEEE Number | IEEE Standard Description | ICX 7550 | ICX 7650 | ICX 7850 | ICX 8100 | ICX 8200 |
|---|---|---|---|---|---|---|
| IEEE 802.1AB | Station and Media Access Control Connectivity Discovery (Link Layer Discovery Protocol, LLDP) | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| IEEE 802.1AE | Media Access Control (MAC) Security | 08.0.95 | 08.0.80 | 08.0.90 | No | No |
| IEEE 802.1BR | Bridge Port Extension | No | No | 08.0.90 | No | No |
| IEEE 802.1ak | Multiple Registration Protocol Multiple MAC Registration Protocol (MMRP) is not supported. Multiple VLAN Registration Protocol (MVRP) is supported in environments without spanning tree and environments with single spanning tree ONLY. MVRP is not supported in environments with Per-VLAN spanning tree or multiple spanning tree. |
08.0.95 | 08.0.90 | 08.0.90 | 10.0.10f | 10.0.00 |
| IEEE 802.1D-1998 | Spanning Tree Protocol (STP) | 8.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| IEEE 802.1Q-2011 | Local and metropolitan area networks--Media Access Control (MAC) Bridges and Virtual Bridged LANs | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| IEEE 802.1Qbb | Priority-based Flow Control | 08.0.95 | No | 08.0.95 | No | No |
| IEEE 802.1S-2002 | Multiple Spanning Tree (MST) | 8.0.95 | 08.0.70 | 08.0.90 | No | 10.0.00 |
| IEEE 802.1W-2001 | Rapid Reconfiguration of Spanning Tree | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| IEEE 802.1X | Port-based Network Access Control (PNAC)1 | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| IEEE 802.1 AX-2008 | Link Aggregation | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| IEEE 802.3 | Carrier Sense Multiple Access/Collision Detection (CSMA/CD) | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| IEEE 802.3ab | 1000BASE-T | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| IEEE 802.3ae | 1BASE5 | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| IEEE 802.3af | Power over Ethernet (15.4 W) | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| IEEE 802.3at | Power over Ethernet enhancements (25.5 W); PoE+ | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| IEEE 802.3az | Energy Efficient Ethernet | 08.0.95 | No | No | 10.0.10f | 10.0.00 |
| IEEE 802.3bz | 2.5GBASE-T | 08.0.95 | 08.0.702 | No | No | 10.0.103 |
| 5GBASE-T | 8.0.95 | 08.0.70 | No | No | 10.0.104 | |
| IEEE 802.3i | 10BASE-T | 08.0.95 | 08.0.70 | 08.0.90 | No | 10.0.104 |
| IEEE 802.3q | Guidelines for the Development of Managed Objects | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| IEEE 802.3u | 100BASE-TX, 100BASE-T4, 100BASE-FX Fast Ethernet at 100 Mbit/s (12.5 MB/s) with auto-negotiation | 08.0.95 | 08.0.70 | 08.0.90 | No | 10.0.105 |
| IEEE 802.3x | Full duplex and flow control | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| IEEE 802.3z | 1000BASE-X Gbit/s Ethernet over Fiber-Optic at 1 Gbps (125 MB/s) | 08.0.95 | 08.0.70 | 08.0.90 | No | 10.0.105 |
| IEEE 802.3ba | 40 Gbit/s and 100 Gbps Ethernet | 08.0.95 | No | 08.0.90 | No | No |
| IEEE 802.3bt | Ethernet Amendment 2: Physical Layer and Management Parameters for PoE over 4 pairs | 08.0.95 | No | No | 10.0.10f6 | 10.0.107 |
| IEEE 1588v2 | Precision Time Protocol (PTP) Transparent Clock | 10.0.10d | 10.0.10d | 10.0.10d | 10.0.10f8 | 10.0.10d |
- Partial support. ↩
- ICX 7650 Z-Series only ↩
- Supported on ICX 8200-24ZP, 8200-48ZP2, and 8200-C08ZP only ↩
- Supported on ICX 8200-C08ZP only ↩
- Supported on ICX 8200-24F and 8200-48F only ↩
- Support for 2-pair, 30 Watts maximum per port only. ↩
- Supported on ICX 8200-24ZP, 8200-48ZP2 and 8200-C08ZP ↩
- Support for 1G models only. Beginning with FastIron release 10.0.10g_cd1 and 10.0.20b_cd1, support is also available on 10G models. Beginning with FastIron release 10.0.10h_cd1, stacking is supported, but is not currently supported in the FastIron 10.0.20 release stream. ↩