Software Upgrade and Downgrade

In this section:

  1. Software Upgrade Procedure Overview
  2. General Considerations for Upgrade to or Downgrade from FastIron 09.0.10a or Later
  3. Initial Steps
  4. Upgrade Considerations for Licensed Features
  5. Upgrade Considerations for ACLs
    This section describes the software upgrade changes related to access control lists (ACLs). For more detailed information, refer to the RUCKUS FastIron Security Configuration Guide.
  6. Upgrade Considerations for the ICX7150-C08P
    Beginning with FastIron 08.0.92, the ICX7150-C08P supports a new BCM53443 SoC chipset. The new chipset offers no functionality changes.
  7. Upgrade Considerations for Stacks
  8. Upgrade Process
  9. Software Downgrade from a UFI to a Non-UFI Version
    It is recommended that you copy the running configuration to a file before downgrading. You can do this using the copy running-config command to copy the configuration to different locations such as a USB disk file or a tftp server, or you can simply enter the show running-config command and then copy the output and paste it into a computer file.
  10. Image download using USB
    Beginning with FastIron 08.0.90, the system can be upgraded by downloading the manifest file in the USB drive.
  11. OS Prompt Recovery Procedures
  12. Software Recovery
  13. Deprecated or Removed Features and Commands
  14. Upgrade and Downgrade Limitations
    The following table lists known issues related to FastIron 08.0.90 image upgrade and downgrade.