Loading the Flash Code Using USB

  1. a. Copy the application image and the boot image to the flash from the USB. 
    ICX7450-48P Router# copy disk0 flash SPR08080f.bin primary
ICX7450-48P Router# copy disk0 flash spz10114.bin bootrom
    b. Save the running configuration to startup configuration using the write memory command.
    ICX7450-48P Router# write memory
  2. a. Reload the device and immediately perform a UFI upgrade.
    ICX7450-48P Router# boot system flash primary
    b. Re-copy the 09.0.10a or later UFI to primary and the secondary flash partition to avoid boot image mismatch. 
    ICX7450-48P Router# copy disk0 flash SPR09010aufi.bin primary
ICX7450-48P Router# copy disk0 flash SPR09010aufi.bin secondary
    c. Enter the show version command to verify that the UFI image has loaded successfully.
Parent topic: Mandatory Upgrade Steps from a Pre-08.0.80 Non-UFI Version to a 09.0.10a or Later UFI Version