Loading the Flash Code Using SCP

The new flash code must be placed on an SCP-enabled host to which the RUCKUS ICX device has access.

Note: Copying the manifest file using SCP is not supported.
Note: The FastIron CLI must be used for the SCP image copy.

  1. a. Copy the flash code from the SCP-enabled host into the flash memory. 
    ICX7450-24P Router# copy scp flash 10.176.132.13 SPR08080f.bin primary

User name:root
Password:
Connecting to remote host......

Receiving data (8192 bytes per dot)
...................................
Automatic copy to member units:  1  4 
SYNCING IMAGE TO FLASH. DO NOT SWITCH OVER OR POWER DOWN THE UNIT(8192 bytes per dot)...
Image copy completed
Primary Image file downloaded successfully.
SCP transfer to device completed
Outbound Connection Closed

    b. Copy the flash code to bootrom. 

    ICX7450-24P Router# copy scp flash 10.176.132.13 spz10114.bin bootrom

User name:root
Password:
Connecting to remote host......
 
Receiving data (8192 bytes per dot)
...........................................................
Automatic copy to member units:  1  4
.....................................................................................................

SYNCING IMAGE TO FLASH. DO NOT SWITCH OVER OR POWER DOWN THE UNIT(8192 bytes per dot)...
 
Image copy completed
................................................................................................
Done.
SCP transfer to device completed
Connection Closed
    c. Save the running configuration to startup configuration using the write memory command.
    ICX7450-24P Router# write memory
  2. a. Reload the device and then immediately upgrade to the UFI. 
    ICX7450-24P Router# boot system flash primary
    b. Re-copy the 09.0.10a or later UFI to the primary and the secondary flash partition to avoid boot image mismatch. 
    ICX7450-24P Router# copy scp flash 10.176.132.13 SPR09010aufi.bin primary
User name:root
Password:
Connecting to remote host......

Receiving data (8192 bytes per dot)
Image copy completed

ICX7450-24P Router# copy scp flash 10.176.132.13 SPR09010aufi.bin secondary
Parent topic: Mandatory Upgrade Steps from a Pre-08.0.80 Non-UFI Version to a 09.0.10a or Later UFI Version