debug mvrp

Enables Multiple VLAN Registration Protocol (MVRP) debugging.
Syntax
debug mvrp [ all | cli | config | db-event | error-event | ethernet unit/slot/port | event | itc | lag lag-id | pdu { err | rx | tx } | reset | rx-event | show | sm-event | timer | tx-event | verbose ]
no debug mvrp [ all | cli | config | db-event | error-event | ethernet unit/slot/port | event | itc | lag lag-id | pdu { err | rx | tx } | reset | rx-event | show | sm-event | timer | tx-event | verbose ]
Parameters
all
Enables all attributes and for all ports.
cli
Enables MVRP CLI debugging.
config
Enables MVRP configuration debugging.
db-event
Enables MVRP database event debugging.
error-event
Enables MVRP error event debugging.
ethernet unit/slot/port
Enables MVRP port debugging.
event
Enables MVRP event debugging.
itc
Enables MVRP ITC debugging.
lag lag-id
Enables MVRP LAG port debugging.
pdu
Enables MVRPDU message debugging.
err
Enables MVRPDU error message debugging.
rx
Enables MVRPDU RX message debugging.
tx
Enables MVRPDU TX message debugging.
reset
Resets all MVRP debugging parameters to the default.
rx-event
Enables MVRP Rx-Event debugging.
show
Displays current MVRP debug parameters.
sm-event
Enables MVRP State-machine event debugging.
timer
Enables MVRP timer debugging.
tx-event
Enables MVRP TX event debugging.
verbose
Enables MVRP verbose debugging mode.
Modes

Privileged EXEC mode

Examples

The following example sets debugging on the MVRP CLI. 

device# debug mvrp cli
MVRP CLI debugging ON
device# debug mvrp

The following example displays current MVRP debug parameters. 

device# debug mvrp show

MVRP Debug Parameters
--------------------
MVRP ALL debugging is ON [Mode: Brief]
 Event: ON
 PDU Tx: OFF
 PDU Rx: OFF
 PDU Error: OFF
 Timer: OFF
 CLI: ON
 Config: ON
 ITC: OFF
 Rx-Event: OFF
 Tx-Event: OFF
 Db-Event: OFF
 Error-Event: OFF
 State-machine Event: OFF
History
Release version Command history
08.0.90 This command was introduced.
Parent topic: Debug Commands H - P