debug ip arp
Activates the debugging of ARP packets.
Parameters
Modes
Privileged EXEC mode
Usage Guidelines
The no form of this command deactivates the debugging of ARP packets.
Examples
device# debug ip arp 10.29.29.53 ARP: packets debugging is on device# show arp Total number of ARP entries: 3, maximum capacity: 4000 No. IP Address MAC Address Type Age Port Status 1 10.29.29.53 0000.0034.1b60 Dynamic 0 2/1/15-2/1/16 Valid 2 10.200.200.45 0000.00cf.c400 Dynamic 0 1/1/13-1/1/14 Valid 3 10.30.30.31 0000.0023.0f00 Dynamic 0 2/1/9-2/1/10 Valid device# clear arp next hop router 10.29.29.53 ARP mapping deleted device# ARP: sent packet oper=request, src 10.29.29.111 0000.0076.2c80: dst 10.29.29.53 0000.0000.0000: Port v29 ARP: sent packet oper=request, src 10.200.200.111 0000.0076.2c80: dst 10.200.200.45 0000.0000.0000: Port v2000 ARP: sent packet oper=request, src 10.30.30.111 0000.0076.2c80: dst 10.30.30.31 0000.0000.0000: Port v300 ARP: sent packet oper=request, src 10.20.67.111 0000.0076.2c80: dst 10.20.10.11 0000.0000.0000: Port mgmt1