debug ip pim packet

Displays debugging information about the Protocol Independent Multicast (PIM) packets.
Syntax
debug ip pim packet source_address group_address [rate]
Parameters
source_address
Specifies the source address of the PIM packet.
group_address
Specifies the group address of the PIM packet.
rate
Specifies the hardware rate.
Modes

Privileged EXEC mode

Examples
device# debug ip pim packet 10.0.0.178 232.0.0.25
debug packet S=10.0.0.178 G=232.0.0.25
device# VRF0 Flow Entry Delete (10.0.0.178 232.0.0.25) HW bits: 1 1
device# debug ip pim packet 10.0.0.178 232.0.0.25 10
debug packet S=10.0.0.178 G=232.0.0.25 rate 10
device# VRF0 Flow Entry Delete (10.0.0.178 232.0.0.25) HW bits: 0 0
VRF0 Flow Entry Delete (10.0.0.178 232.0.0.25) HW bits: 0 0
Parent topic: Debug Commands H - P