debug dot1x-mka
debug dot1x-mka
{
event
|
packets
|
state
|
timers
|
port
device/slot/port
}
no debug dot1x-mka
{
event
|
packets
|
state|
timers
|
port
device/slot/port
}
Privileged EXEC mode.
The
no form of the command disables MKA debugging in progress. As an alternative, the command
no debug all can be used to disable all debugging in progress.
Using the
debug dot1x-mka command may have impact on system performance.
When the
debug dot1x-mka packets command or the
debug dot1x-mka timers command is input, the console is likely to be overwhelmed with packets because MKA
packets are sent at a very high rate. Consequently, it is recommended that you first
establish another telnet session for CLI input.
If the
debug dot1x-mka port
port command is input, only the debug messages related to that port are displayed.
| Release version | Command history |
|---|---|
| 08.0.11 | This command was introduced. |