Overview of PEAP Configuration

Protected Extensible Authentication Protocol (PEAP) is one of several methods available for user authentication in Cloudpath.

PEAP is a username/password-based method of authentication.

Note: This document provides the steps on how to configure your controller and your Cloudpath system to communicate with an external RADIUS server.

If you will be using a Ruckus ZoneDirector controller to set up PEAP, follow the procedures in these sections:

  1. Set up the AAA Authentication Server on the Ruckus ZoneDirector Controller
  2. Configuring a PEAP WLAN on a Ruckus ZoneDirector Controller
  3. Configuring PEAP on Cloudpath to Integrate with the Ruckus Controller

If you will be using a Ruckus SmartZone controller to set up PEAP, follow the procedures in these sections:

  1. Set up the AAA Authentication Server on the Ruckus SmartZone Controller
  2. Conifguring a PEAP WLAN on a Ruckus SmartZone Controller
  3. Configuring PEAP on Cloudpath to Integrate with the Ruckus Controller