Removing a Port-Based VLAN

This example shows how to remove VLAN 5 from all devices shown in More Complex Port-based VLAN.

  1. Access the global configuration mode on Device-A by entering the following commands. 
    device-A# enable
No password has been assigned yet...
device-A# configure terminal
device-A(config)#
  2. Enter the following command to remove the port-based VLAN 5. 
    device-A(config)# no vlan 5
  3. Enter the following commands to exit the global configuration mode and save the configuration to the system-config file on flash memory. 
    device-A(config)# end
device-A# write memory
  4. Repeat step 1 through step 3 on Device-B and Device-C.
Parent topic: Layer 2 Port-based VLANs