Displaying the VLAN Group Information
To verify configuration of VLAN groups, display the running-config file. If you have saved the configuration to the startup-config file, you also can verify the configuration by displaying the startup-config file. The following example shows the running-config information for the VLAN group configured in the previous examples. The information appears in the same way in the startup-config file.
device# show running-config lines not related to the VLAN group omitted... vlan-group 1 vlan 2 to 20 add-vlan 1001 to 1002 tagged ethe 1/1/1 to 1/1/2 router-interface-group lines not related to the virtual routing interface group omitted... interface group-ve 1 ip address 10.10.10.1 255.255.255.0
Note: If you have enabled display of subnet masks in CIDR notation, the IP address information
is shown as follows: 10.10.10.1/24.