Default VLAN
By default, all the ports on a RUCKUS ICX device are in a single port-based VLAN. This VLAN is called the DEFAULT-VLAN and is VLAN number 1.
The following figure shows an example of the default Layer 2 port-based VLAN.
When you configure a port-based VLAN, one of the configuration items you provide is the ports that are in the VLAN.
Some network configurations may require that a port be able to reside in two or more Layer 2 broadcast domains (port-based VLANs). In this case, you can enable a port to reside in multiple port-based VLANs by tagging the port. Refer to the Multi-Range VLANs.
If your network requires that you use VLAN ID 1 for a user-configured VLAN, you can reassign the default VLAN to another valid VLAN ID. Refer to Assigning a Different VLAN ID to Default and Reserved VLANs.