show license
Displays information about Self Authenticated Upgrade licenses installed on a device.
Modes
Privileged EXEC mode
Usage Guidelines
The command can be used on a standalone device or on the active controller for a stack.
This command does not display information about XML licenses that were installed on
the device in FastIron 08.0.70 or earlier releases. The
show license unit command displays information about both SAU and XML licenses.
The
show license
command displays the following information:
| Output field | Description |
|---|---|
| Unit | Unit number assigned in the stack. For standalone units, the unit number is 1. |
| License Name | Name of Software Authenticated Upgrade (SAU) license installed. |
| L3 Premium | (Yes, No) Indicates whether Layer 3 features are enabled by the license. |
| Port Speed Upgrade | (Yes, No) Indicates whether the license allows ports to be upgraded from the default speed (1 Gbps). |
| Speed | Speed to which ports covered by the license can be upgraded (10 Gbps). |
| Ports | Indicates the number of ports covered by the license. |
| MACsec | Indicates whether a MACsec license is installed. |
Examples
The following example shows a 2x10G license installed on stack unit 1. Stack unit 2 has 8x10G and Layer 3 Premium licenses.
ICX7250-24P Router# show license installed Unit License Name L3 Premium Port Speed Upgrade Speed Ports MACsec 1 L3-PREM-2X10G Yes Yes 10G 2 NA 2 L3-PREM-8x10G Yes Yes 10G 8 NA ICX7150-24P Router#
History
| Release version | Command history |
|---|---|
| 08.0.80 | This command was enhanced to support all ICX platforms that support SAU licensing. |
| 08.0.61 | This command was introduced. |