`show ipv6 bgp peer-group`

Displays peer-group information.

Syntax

show ipv6 bgp peer-group peer-group-name

Parameters

peer-group-name: Specifies a peer group name.

Modes

User EXEC mode

Usage Guidelines

Only the parameters that have values different from their defaults are listed.

Examples

The following example shows sample output from the show ipv6 bgp peer-groupcommand.

device> show ipv6 bgp peer-group peer_group1

1   BGP peer-group is peer_group1
      Address family : IPV4 Unicast
        no activate
      Address family : IPV4 Multicast
        no activate
      Address family : IPV6 Unicast
        activate
      Address family : IPV6 Multicast
        no activate
      Address family : VPNV4 Unicast
        no activate
      Address family : L2VPN VPLS
        no activate
    Members:
       IP Address: 2000:400:400:400::3, AS: 65020

Show Commands

show ipv6 bgp peer-group

`show ipv6 bgp peer-group`