show acl-on-arp

Displays the list of ACLs that are configured to filter ARP requests.
Syntax
show acl-on-arp [ ethernet unit/slot/port [ to unit/slot/port | [ ethernet unit/slot/port to unit/slot/port | ethernet unit/slot/port ] [ lag lag-id to lag-id | lag lag-id ]... ] ] | loopback num | tunnel num | ve num ]
show acl-on-arp [ lag { id lag-id | name lag-name | lag-id [ to unit/slot/port | [ ethernet unit/slot/port to unit/slot/port | ethernet unit/slot/port ] [ lag lag-id to lag-id | lag lag-id ]... }]
Parameters
ethernet unit/slot/port
Displays the list of ACLs that are configured to filter ARP requests on a specific Ethernet interface.
to unit/slot/port
Displays the list of ACLs that are configured to filter ARP requests on a range of Ethernet interfaces.
loopback num
Displays the list of ACLs that are configured to filter ARP requests on a specific loopback interface.
tunnel num
Displays the list of ACLs that are configured to filter ARP requests on a specific tunnel interface.
ve num
Displays the list of ACLs that are configured to filter ARP requests on a specific VE interface.
lag
Displays the status of the LAG.
id lag-id
Displays the list by LAG ID.
name lag-name
Displays the list by LAG name.
Modes

User EXEC mode

Privileged EXEC mode

Global configuration mode

Interface configuration mode

Access list configuration mode

Usage Guidelines

The Filter Count column shows how many ARP packets have been dropped on the interface since the last time the count was cleared.

Examples

The following example displays a sample output of the show acl-on-arp command. 

device(config)# show acl-on-arp
Port	ACL ID		Filter Count
2		103  		10
3		102			23
4		101			12
History
Release version Command history
08.0.61 This command was modified to add lag lag-id options.
Parent topic: Show Commands