show bfd uc sessions
Displays Bidirectional Forwarding Detection (BFD) session information for the micro
controller.
Syntax
show bfd uc sessions
{
ipv4
|
ipv6
}
{
all
|
session-id
}
[
stack-id
]
show bfd uc sessions
statistics
drops
stack-id
Parameters
Modes
User EXEC mode
Usage Guidelines
This command is supported for RUCKUS ICX 7750 and ICX 7850 devices.
Examples
The following example shows all IPv4 BFD session information for the micro controller.
device> show bfd uc sessions ipv4 all
Flags: H: Hop [S:Single/M:Multi] SH/MH: Single-hop/Multi-hop
E: Echo [Y:Yes/N:No] D: dem-mode [Y:Yes/N:No]
P: Passive-Mode [Y:Yes/N:No] V6: Session is V6
Ad-Tx-Rem: Tx adm-down to remote on session removal
M-Bfd : Micro Bfd SH sessions [Will be Yes for LAG ports]
Intervals: All time intervals shown in msecs, Multiplier shown in units
Id Neighbor Local Phy-Port L-State R-State M-Bfd P/H/E
-- -------- ----- -------- ------- ------- ----- -----
1 20.20.20.1 10.10.10.1 1/1/13 UP UP No N/M/N
2 40.40.40.1 30.30.30.1 1/1/14 UP UP No N/M/N
History
| Release version | Command history |
|---|---|
| 08.0.90 | This command was introduced. |