show issu status

Runs a pre-ISSU check and monitors the status of the current upgrade.
Syntax
show issu status
Modes

Privileged EXEC mode

Usage Guidelines

Use this command to show the ISSU status before or during an upgrade.

Examples

Output for a successful upgrade in progress. 

device# show issu status
ISSU Status: In Progress
Upgrade State: UNIT JOIN

Upgrade Option: issu primary
ID   Type          Role      State        
1    ICX7450-32ZP  member    UPGRADING           
3    ICX7450-32ZP  member    UPGRADE PENDING     
4    ICX7450-32ZP  active    UPGRADE PENDING

Output of the command when errors are encountered. 

device# show issu status
ISSU Status: Aborted
Upgrade State: UPGRADE ABORT
Upgrade Option: issu primary
Reason for Abort: UNABLE TO UPGRADE

ID   Type          Role      State        
1    ICX7450-32ZP  member    UPGRADE ABORT       
3    ICX7450-32ZP  standby   UPGRADE PENDING     
4    ICX7450-32ZP  active    UPGRADE PENDING

Note: An error condition is indicated by three asterisks (***).

If a manual abort is done or ISSU detects an abort condition (with ISSU started with the no on-error option), the stack is left as it is and a manual recovery is required by running either the reload-primary or reload-secondary command.

If an upgrade is not in progress, this command displays information about whether the system is ready for an upgrade. 

device# show issu status
Topology is Ring                         Yes
Standby Present                          Yes
Standby ready for upgrade                Yes
Flash use in progress                    No
Secure Setup in progress                 No
ISSU in progress or aborted              No
Election pending                         No
Election in progress                     No
Reload pending                           No
CPU utilization high                     No
All units in ready state                 Yes
Primary Image is upgrade compatible      Yes
Secondary Image is upgrade compatible    Yes
Startup config and Running Config Same   Yes
User in Config mode                      No
System ready for issu
ISSU not in progress

If an upgrade is completed, this command displays the following information, 

device# show issu status
Last upgrade time                        00:02:19.367 GMT+00 Tue Mar 20 2016
The older image before-ISSU              SPR08050b433.bin 
Topology is Ring                         Yes
Standby Present                          Yes
Standby ready for upgrade                Yes
Flash use in progress                    No
Secure Setup in progress                 No
ISSU in progress or aborted              No
Election pending                         No
Election in progress                     No
Reload pending                           No
CPU utilization high                     No
All units in ready state                 Yes
Primary Image is upgrade compatible      Yes
Secondary Image is upgrade compatible    Yes
Startup config and Running Config Same   Yes
User in Config mode                      No
System ready for issu
ISSU not in progress

History
Release version Command history
08.0.50 This command was introduced.
08.0.70 Support for Campus Fabric (SPX) systems was added.
Parent topic: Show Commands