ipv6 mld max-group-address

Configures the maximum number of MLD group addresses for VRFs.
Syntax
ipv6 mld max-group-address num
no ipv6 mld max-group-address num
Command Default

The default value is 4096.

Parameters
num
Specifies the maximum number of MLD group addresses available, either for the default VRF or for the specified VRF. The range is 1 through 8192.
Modes

Global configuration mode

VRF configuration sub-mode

Usage Guidelines

If the no form of this command is configured, the maximum number of MLD group addresses is reset to the default.

Any MLD group memberships exceeding the group limit are not processed.

Examples

The following example configures a maximum of 1000 MLD group addresses for the default VRF. 

device# configure terminal
device(config)# ipv6 mld max-group-address 1000

The following example configures a maximum of 1000 MLD group addresses for the VRF named blue. 

device# configure terminal
device(config)# ipv6 router pim vrf blue
device(config-ipv6-pim-router-vrf-blue)# ipv6 mld max-group-address 1000
Parent topic: Commands I