`ip dhcp-client enable`

Enables DHCP client auto-update.

Syntax

ip dhcp-client enable

no ip dhcp-client enable

Modes

Global configuration mode

Interface configuration mode

Usage Guidelines

You can enable this command on a switch in global configuration mode. On routers, you can enable this command in interface configuration mode.

The noform of the command disables the DHCP client.

Examples

The following example enables the DHCP client on a switch.

device(config)# ip dhcp-client enable

The following example enables the DHCP client on a router.

device(config-if-e1000-1/1/1)# ip dhcp-client enable

On a router, enter the ip dhcp-client enable command to re-enable the DHCP client.

device(config-if-ve1)# ip dhcp-client enable

History

Release version	Command history
08.0.61	Example for enabling DHCP client on VE was added.

ip dhcp-client enable