ip igmp max-group-address

Configures the maximum number of IGMP group addresses for VRFs.
Syntax
ip igmp max-group-address num
no ip igmp max-group-address num
Command Default

The default value is 4096.

Parameters
num
Specifies the maximum number of IGMP group addresses available, either for the default VRF or for the specified VRF. The range is 1 through 8192.
Modes

Global configuration mode

VRF configuration sub-mode

Usage Guidelines

This command replaces the system-max igmp-max-group-address command.

If the no form of this command is configured, the maximum number of IGMP group addresses is reset to the default.

Examples

The following example configures a maximum of 1000 IGMP addresses for the default VRF. 

device# configure terminal
device(config)# ip igmp max-group-address 1000

The following example configures a maximum of 1000 IGMP group addresses for the VRF named vpn1. 

device# configure terminal
device(config)# vrf vpn1
device(config-vrf-vpn1)# address-family ipv4
device(config-vrf-vpn1-ipv4)# ip igmp max-group-address 1000
Parent topic: Commands I