ipv6 nd ra-route-info-option

Configures the router advertisement (RA) route information option.
Syntax
ipv6 nd ra-route-info-optionipv6-prefixvalue{high|low|medium}
no ipv6 nd ra-route-info-optionpv6-prefixvalue{high|low|medium}
Command Default

The RA route information option is not enabled.

Parameters
ipv6-prefix
Specifies the IPv6 prefix address in the format X:X::X:X/M.
value
Specifies the route lifetime in seconds. Valid values range from 0 through 294967295 seconds. The default is 604800 seconds.
high
Sets the router preference to high.
low
Sets the router preference to low.
medium
Sets the router preference to medium.
Modes

Interface configuration mode

Usage Guidelines

The no form of the command disables RA route information configurations.

Examples

The following example enables router advertisement route infomration configurations and sets the router preference to low. The route lifetime is set to 1112 seconds.

device# configure terminal
device(config)# interface ve 1011
device(config-vif-1011)# ipv6 nd ra route-info-option 3::3/116 1112 low

The following example disables the router advertisement route infomration configurations. 

device# configure terminal
device(config)# interface ve 1011
device(config-vif-1011)# no ipv6 nd ra route-info-option 3::3/116 1112 low
History
Release version Command history
08.0.95C This command was introduced.
Parent topic: Commands I