ICX to SmartZone Connection Status

In this section:

  1. Displaying the SmartZone Connection Status
  2. Disconnecting the ICX Switch from SmartZone
    Use the manager disconnect command in privileged exec or global configuration mode to disconnect the ICX switch from SmartZone and initiate a new connection based on the currently available list of SmartZone IP addresses.
  3. Disabling SmartZone Management on the ICX Switch
    When SmartZone management is disabled on the switch, the switch will not initiate a connection with SmartZone even if a SmartZone IP address is available.
Parent topic: Switch Management