server. This command can be configured in BGP L2VPN EVPN address family configuration mode for RUCKUS ICX 7850 and ICX7550 devices only. The no form of the command removes the neighbor as a route-reflector client. The following example configures a neighbor to be a route-reflector client. device
address family, this command must be configured for each BGP EVPN peer. This command can be configured in BGP L2VPN EVPN address family configuration mode for RUCKUS ICX 7850 and ICX7550 devices only. The no form of the command disables the sending of the community attribute in updates to a specified
mode for RUCKUS ICX 7850 and ICX7550 devices only. The no form of the command restores the default. The following example configures client-to-client reflection on the BGP4 host device. device# configure terminal device(config)# router bgp device(config-bgp-router)# client-to-client-reflection The
Changing the Number of Load Sharing (ECMP) Paths for IPv4
ECMP Load Sharing Paths per Device ICX 7150 / ICX7550 / ICX 8200 ICX 7650 / ICX 7850 8 32 For optimal results, set the maximum number of paths to a value at least as high as the maximum number of equal-cost paths your network typically contains. For example, if the Layer 3 switch you are configuring