neighbor route-reflector-client
neighbor
{ ip-address |ipv6-address | peer-group-name
} route-reflector-clientno neighbor
{ ip-address |ipv6-address
| peer-group-name
} route-reflector-clientA neighbor is ont configured to be a route-reflector client.
BGP configuration mode
BGP address-family IPv6 unicast configuration mode
BGP L2VPN EVPN address family configuration mode
When this command is entered in BGP global configuration mode, it applies only to the IPv4 address family. Use this command in BGP address-family IPv6 unicast configuration mode for BGP4+ configurations. Use this command in BGP L2VPN EVPN address family configuration mode for BGP L2VPN EVPN configurations.
Use this command on a host device to configure a neighbor to be a route-reflector client. Once configured, the host device from which the configuration is made acts as a route-reflector server.
This command can be configured in BGP L2VPN EVPN address family configuration mode for RUCKUS ICX 7850 and ICX 7550 devices only.
The no form of the command removes the neighbor as a
route-reflector client.
The following example configures a neighbor to be a route-reflector client.
device# configure terminal device(config)# router bgp device(config-bgp-router)# neighbor 10.11.12.13 route-reflector-client
The following example configures a neighbor to be a route-reflector client for the BGP L2VPN EVPN address family.
device# configure terminal device(config)# router bgp device(config-bgp-router)# local-as 656 device(config-bgp-router)# neighbor 1.1.1.35 remote-as 656 device(config-bgp-router)# address-family l2vpn evpn device(config-bgp-l2vpn-evpn)# neighbor 1.1.1.35 activate device(config-bgp-l2vpn-evpn)# neighbor 1.1.1.35 send-community both device(config-bgp-l2vpn-evpn)# neighbor 10.1.1.35 route-reflector-client
| Release version | Command history |
|---|---|
| 10.0.20 | This command was introduced. |