Ruckus SCG Client Information

The following are the MIBs for client information nodes (RUCKUS-CTRL-MIB). These MIBs indicate information on the user equipment’s MAC address and status. Operators would need to append the user equipment’s MAC address to the string length of 6 (decimal format) as index after each OID to get the required information.

For MAC address of C8:AA:7C:8E:67:C4, it must be translated to equivalent decimal value of 202.170.124.142.103.196 for the query.

For example, use the following command to get the status of the client (with MAC C8:AA:7C:8E:67:C4):

  • snmpget -v2c -c public <ip_addr> RUCKUS-CTRL-MIB::ruckusCtrlClientStatus.6.202.170.124.142.103.196
Note: Length of the string index should always be 6. Read only indicates that the particular SNMP set will not be supported.

In the controller user interface using the Global SNMP configuration (Configuration > System > SNMP Agent) you can query client status using RUCKUS-CTRL-MIB.