Ruckus Controller AP Client Table
The following MIBs define the information for the controller Client table (ruckusCtrlApClientTable) for users to easily access basic information of all the clients in a specific AP. Using the ClientMac in this table, users can go to Client table to get more details about this client. The index of the table is the ApMac.
Caution: These tables are designed for debugging specific wired clients for a period of time.
It is recommended that you do not use this for periodic and long time monitoring.
Note: It is recommended to use Public API or GPB/MQTT to obtain similar information for
monitoring purposes.
To query:
- all clients in a specific ap1, the following command can be used:
snmpwalk ruckusCtrlApClientTable.ap1
- all information, use the command format:
snmpwalk {option} ruckusCTRLSummaryApTable - all AP MAC in domain1, use the command format:
snmpwalk {option}ruckusCtrlSummryApMac.domain.{domain1 UUID} - A MAC address of C8:AA:7C:8E:67:C4 must be translated to the equivalent decimal value
of 202.170.124.142.103.196 for the query.
snmpget -v2c -c public <ip_addr> RUCKUS-CTRL-MIB::ruck- usCtrlApClientMac.6.202.170.124.142.103.196, where the length of the string index is always 6.
202.170.124.142.103.196: MAC Address C8:AA:7C:8E:67:C4 in decimal form
- The MIB browser should translate the MAC address into decimal form as:
.1.3.6.1.4.1.25053.1.8.1.1.1.1.9.1.6.6.202.170.124.14 2.103.196
200.170.124.142.103.196: MAC Address C8:AA:7C:8E:67:C4 in decimal form