Activating and Editing the Assa Abloy Plugin
The RUCKUS IoT Controller provides
support for the Assa Abloy door locks plugin. The RUCKUS IoT Controller reads the
packet from the IoT AP and routes the packets to the Visionline Server.
To establish a connection to a vendor infrastructure, the administrator must perform the following steps.
- From the main menu, click Admin.
- In the left navigation pane, click Plugins.
- In the Select a Plugin to Activate list, select the Assa Abloy plugin and click Activate.
- After the Assa Abloy plugin is
activated, enter the following configuration parameters.
- Select
Globally enable connector on all valid APs to
add all respective IoT APs automatically. Connectors are mapped to the
IoT AP by adding the connector name tag to the IoT AP.Note: If Globally enable connector on all valid APs is not selected, you can activate the plugin for each AP by adding a tag. Refer to Adding Tags to an AP for more information.
- For Username, enter the name of the user connecting to the Visionline Server
- For Password, enter the password of the user connecting to the Visionline Server.
- Enter the
Visionline IP address or
FQDN.Note: By default, the port number is 443.
- Select
Globally enable connector on all valid APs to
add all respective IoT APs automatically. Connectors are mapped to the
IoT AP by adding the connector name tag to the IoT AP.
- Click Apply.
- To deactivate the Assa Abloy plugin, select it and click Deactivate.
- To edit the configuration of the Assa Abloy plugin, select it and click Update.


