Enabling SDVoE where Edge-ports are Automatically Created
The following task enables SDVoE in a
network, as illustrated in the Enabling SDVoE where
Edge-ports are Automatically Created figure. Edge ports are automatically configured for Switch 1 and Switch 2.
Tracking for IGMPv2 and IGMPv3 is automatically enabled. Multicast passive, dynamic
edge port
and IGMPv2 and IGMPv3 client tracking is configured for Switch 1 and Switch 2. Multicast
active,
dynamic edge port and IGMPv2 and IGMPv3 client tracking is configured for the Querier
switch.
Note: Fast leave is not supported.
- On switch 1, enter global configuration mode.
- Configure a VLAN dedicated to the SDVoE application and add ports to it.
- Configure a multicast passive dynamic edge port and IGMPv2 and IGMPv3 client tracking for the VLAN.
- For the querier switch, enter global configuration mode.
- Configure a VLAN dedicated to the SDVoE application and add ports to it.
- Configure a multicast active dynamic edge port and IGMPv2 and IGMPv3 client tracking for the VLAN.
- Configure the IPv4 querier address per VLAN.
- On switch 2, enter global configuration mode.
- Configure a VLAN dedicated to the SDVoE application and add ports to it.
- Configure a multicast passive dynamic edge port and IGMPv2 and IGMPv3 client tracking for the VLAN.
The following example configures SDVoE in a
network using the multicast sdvoe
auto-edge-port-track-act and multicast sdvoe
auto-edge-port-track-pas commands.
Switch 1: Switch-1# configure terminal Switch-1(config)# vlan 11 Switch-1(config-vlan-11)# tagged ethernet 1/2/6 ethernet 3/2/7 lag 1 Switch-1(config-vlan-11)# multicast sdvoe auto-edge-port-track-passive Querier Switch: Querier# configure terminal Querier(config)# vlan 11 Querier(config-vlan-11)# tagged lag 1 lag 2 Querier(config-vlan-11)# multicast sdvoe auto-edge-port-track-active Querier(config-vlan-11)# multicast querier-address 3.3.3.3 Switch 2: Switch-2# configure terminal Switch-2(config)# ip multicast edge-port ethe 1/3/4 Switch-2(config)# vlan 11 Switch-2(config-vlan-11)# tagged ethernet 1/3/4 ethernet 3/3/2 lag 2 Switch-2(config-vlan-11)# multicast sdvoe auto-edge-port-track-passive