The maximum number of register packets
sent or received per second by a device can be configured.
Complete the following steps to configure
the register message rate limit to 20 packets per second, changing it from the
default
of 1 packet per second. This rate is applicable to register messages from all sources.
This rate is applied to all sources that are permitted by the accept-register filter
that is used to block unauthorized sources or groups. - Enter global configuration mode.
device# configure terminal
- Enable PIM globally.
device(config)# router pim
- Set the register rate limit to
20 packets per second.
device(config-pim-router)# register-rate-limit 20
The following example sets the register message
rate limit to 20 packets per second.
device# configure terminal
device(config)# router pim
device(config-pim-router)# register-rate-limit 20
The following example restores the register
message rate limit to the default of 1 packet per second..
device# configure terminal
device(config)# router pim
device(config-pim-router)# no register-rate-limit