Management Commands

The following list of commands and command variants are required for administration of the RUCKUS ICX device. These commands are available only after an administrator has successfully logged in to the RUCKUS ICX device.

Management Commands

Command Tested Command Variants Description
aaa

aaa authentication enable default radius local

aaa authentication login default radius local

aaa authentication web-server default local

Configures the AAA authentication functions

banner banner motd+

Manages the login banner

clock clock set time date

Manages the internal clock

config configure terminal

Switches to global configuration mode

crypto crypto key generate

crypto key zeroize

To generate and delete cryptographic functions.

enable enable Switches to Privileged EXEC mode
enable privilege-mode password password Enables the privileged mode password.
exit exit

In lower-level configuration modes, exit moves you up one level in the command hierarchy.

In Privileged EXEC mode, exitlogs out of (exits) the current session; it is used to terminate both local console and remote SSH sessions.
fips

fips show

fips zeroize all

Manages Korean Common Criteria configuration.

interface interface ethernet stackid/slot/port

mac access-group MAC_ACL_name in

tunnel

Configures an interface or associates an ACL with an interface.

ip / ipv6 access-list

access-group

address

ssl profile (IPv4 only)

Configures IPv4 and IPv6 parameters.

ip ssh enable no ip ssh enable Disables inbound and outbound SSH access.
ip ssh scp ip ssh scp enable Enables SCP.
logging logging host ip-address udp-port port-number

Configures the audit logging host.

logging enable logging enable pki Configures PKI logging.
logging enable pki pki-extended Configures PKI extended logging.
reload reload

Reloads the current flash image.

show show clock

show flash

show ip client-pub-key

show logging

show pki

show running-config

show version

Displays information about specified configuration.

snmp-server snmp-server Enable SNMP access.
logging on logging on Enables local syslog logging.
timeout

cli timeout time

Configures the timeout for CLI inactivity in minutes. The default is 2 minutes. The CLI session timeout also controls SSH sessions. Valid values are 0-240.

Note: It is recommended that you configure a non-zero value so that a timeout occurs any time the system is idle.
username username user password password-string

Manages user accounts.

web-management disable web-management disable Disable web management access.
write write memory

Writes to persistent storage.

Parent topic: Korean Common Criteria Configuration