Configuration Fundamentals
For considerations related to configuration fundamentals in an 802.1BR (SPX) configuration, refer to the RUCKUS FastIron Campus Fabric Configuration Guide
| Feature | ICX 7150 | ICX 7250 | ICX 7450 | ICX 7550 | ICX 7650 | ICX 7750 | ICX 7850 |
|---|---|---|---|---|---|---|---|
| Terminal logging | 8.0.70 | 8.0.70 | 8.0.70 | 8.0.95 | 8.0.70 | 8.0.70 | 8.0.90 |
| Reset button to factory default settings | 8.0.70 | No | No | 8.0.95 | 8.0.70 | No | 8.0.90 |
| 10G LRM adapter | 8.0.61 | 8.0.61 | No | No | NA | 8.0.61 | No |
| System name, contact, and location | 8.0.60 | 8.0.30 | 8.0.20 | 8.0.95 | 8.0.70 | 8.0.10 | 8.0.90 |
| Cancelling an outbound Telnet session | 8.0.60 | 8.0.30 | 8.0.20 | 8.0.95 | 8.0.70 | 8.0.10 | 8.0.90 |
| Byte-based broadcast, multicast, and unknown-unicast limits | 8.0.60 | 8.0.30 | 8.0.20 | 8.0.95 | 8.0.70 | 8.0.10 | 8.0.90 |
| Packet-based broadcast, multicast, and unknown-unicast limits | 8.0.60 | 8.0.30 | 8.0.20 | 8.0.95 | 8.0.70 | 8.0.10 | 8.0.90 |
| CLI banners | 8.0.60 | 8.0.30 | 8.0.20 | 8.0.95 | 8.0.70 | 8.0.10 | 8.0.90 |
| Port name | 8.0.60 | 8.0.30 | 8.0.20 | 8.0.95 | 8.0.70 | 8.0.10 | 8.0.90 |
| 10 Mbps port speed | 8.0.60 | 8.0.30 | 8.0.20 | 8.0.95 | 8.0.70 | No | No |
| 100 Mbps port speed | 8.0.60 | 8.0.30 | 8.0.20 | 8.0.95 | 8.0.70 | 8.0.10 | No |
| 1000 Mbps port speed | 8.0.60 | 8.0.30 | 8.0.20 | 8.0.95 | 8.0.70 | 8.0.10 | 8.0.90 |
| 2.5 Gbps port speed | 8.0.611 | No | No | 8.0.952 | 8.0.703 | No | No |
| 5 Gbps port speed | 8.0.914 | No | No | 8.0.952 | 8.0.703 | No | No |
| 10 Gbps port speed | 8.0.914 | No | No | 8.0.952 | 8.0.703 | No | No |
| 25 Gbps port speed | No | No | No | No | No | No | 8.0.905 |
| 40 Gbps port speed | No | No | 8.0.20 | 8.0.95 | 8.0.70 | 8.0.10 | 8.0.90 |
| 100 Gbps port speed | No | No | No | 8.0.95 | 8.0.70 | No | 8.0.90 |
| Auto-negotiation | 8.0.60 | 8.0.30 | 8.0.20 | 8.0.95 | 8.0.70 | 8.0.10 | 8.0.90 |
| Auto-negotiation maximum port speed advertisement | 8.0.606 | 8.0.30 | 8.0.20 | 8.0.95 | 8.0.70 | 8.0.10 | 8.0.90 |
| Full-duplex mode | 8.0.60 | 8.0.30 | 8.0.20 | 8.0.95 | 8.0.70 | 8.0.10 | 8.0.90 |
| Auto MDI/MDIX detection | 8.0.60 | 8.0.30 | 8.0.20 | 8.0.95 | 8.0.70 | 8.0.10 | 8.0.90 |
| Port status (enable or disable) | 8.0.60 | 8.0.30 | 8.0.20 | 8.0.95 | 8.0.70 | 8.0.10 | 8.0.90 |
| Support for 100BaseTX | No | 8.0.30 | 8.0.20 | No | No | No | 8.0.90 |
| Support for 100BaseFX | No | 8.0.30 | 8.0.20 | 8.0.95 | 8.0.70 | No | 8.0.90 |
| Gbps fiber negotiate mode | 8.0.60 | 8.0.30 | 8.0.20 | 8.0.95 | 8.0.70 | 8.0.10 | 8.0.90 |
| VoIP auto-configuration and CDP | 8.0.60 | 8.0.30 | 8.0.20 | 8.0.95 | 8.0.70 | 8.0.10 | 8.0.90 |
| Broadcast, multicast, and unknown-unicast suppression port dampening | 8.0.60 | 8.0.30h | 8.0.30h | 8.0.95 | 8.0.70 | 8.0.30h | 8.0.90 |
| Port flap dampening | 8.0.60 | 8.0.30 | 8.0.20 | 8.0.95 | 8.0.70 | 8.0.10 | 8.0.90 |
| Shutdown prevention for loop-detect | 8.0.60 | 8.0.30 | 8.0.20 | 8.0.95 | 8.0.70 | 8.0.20 | 8.0.90 |
| Elapsed timestamp for port statistics reset | 8.0.60 | 8.0.30 | 8.0.30 | 8.0.95 | 8.0.70 | 8.0.30 | 8.0.90 |
| Traffic counters for outbound traffic | 8.0.60 | 8.0.30 | 8.0.20 | 8.0.95 | 8.0.70 | 8.0.10 | 8.0.90 |
| Egress queue counters | 8.0.60 | 8.0.30 | 8.0.20 | 8.0.95 | 8.0.70 | 8.0.10 | 8.0.90 |
| Flash and boot code verification | 8.0.60 | 8.0.30 | 8.0.20 | 8.0.95 | 8.0.70 | 8.0.10 | 8.0.90 |
| Flash image verification | 8.0.60 | 8.0.30 | 8.0.20 | 8.0.95 | 8.0.70 | 8.0.10 | 8.0.90 |
| Changing flash timeout value | 8.0.60 | 8.0.30 | 8.0.30 | 8.0.95 | 8.0.70 | 8.0.30 | 8.0.90 |
| Software reboot | 8.0.60 | 8.0.30 | 8.0.20 | 8.0.95 | 8.0.70 | 8.0.10 | 8.0.90 |
| Show boot preference | 8.0.60 | 8.0.30 | 8.0.20 | 8.0.95 | 8.0.70 | 8.0.10 | 8.0.90 |
| Loading and saving configuration files | 8.0.60 | 8.0.30 | 8.0.20 | 8.0.95 | 8.0.70 | 8.0.10 | 8.0.90 |
| System reload scheduling | 8.0.60 | 8.0.30 | 8.0.20 | 8.0.95 | 8.0.70 | 8.0.10 | 8.0.90 |
| Management port | 8.0.607 | 8.0.30 | 8.0.20 | 8.0.95 | 8.0.70 | 8.0.10 | 8.0.90 |
| Telnet | 8.0.60 | 8.0.30 | 8.0.20 | 8.0.95 | 8.0.70 | 8.0.10 | 8.0.90 |
| TFTP | 8.0.60 | 8.0.30 | 8.0.20 | 8.0.95 | 8.0.70 | 8.0.10 | 8.0.90 |
| Multi-port static MAC address | 8.0.60 | 8.0.30 | 8.0.20 | 8.0.95 | 8.0.70 | 8.0.10 | 8.0.90 |
| Static MAC entries with option to set traffic priority | 8.0.60 | 8.0.30 | 8.0.20 | 8.0.95 | 8.0.70 | 8.0.10 | 8.0.90 |
| MAC address learning | 8.0.60 | 8.0.30 | 8.0.20 | 8.0.95 | 8.0.70 | 8.0.10 | 8.0.90 |
| MAC address filtering on source and destination MAC addresses | 8.0.60 | 8.0.30 | 8.0.20 | 8.0.95 | 8.0.70 | 8.0.10 | 8.0.90 |
| MAC address move notification | 8.0.60 | 8.0.30 | 8.0.20 | 8.0.95 | 8.0.70 | 8.0.10 | 8.0.90 |
| Ability to disable MAC learning | 8.0.60 | 8.0.30 | 8.0.20 | 8.0.95 | 8.0.70 | 8.0.10 | 8.0.90 |
| Layer 2 jumbo frames | 8.0.60 | 8.0.30 | 8.0.20 | 8.0.95 | 8.0.70 | 8.0.10 | 8.0.90 |
| Ethernet loopback | 8.0.60 | 8.0.308 | 8.0.308 | 8.0.95 | 8.0.70 | 8.0.308 | 8.0.90 |
| Macros (batch and execute) | 8.0.60 | 8.0.40 | 8.0.40 | 8.0.95 | 8.0.70 | 8.0.40 | 8.0.90 |
| CLI history | 8.0.60 | 8.0.40 | 8.0.40 | 8.0.95 | 8.0.70 | 8.0.40 | 8.0.90 |
| Fanless mode | 8.0.609 | No | No | No | No | No | No |
| Status button support | 8.0.70 | No | No | 8.0.95 | 8.0.70 | No | 8.0.90 |
| LEDs On/Off command | 8.0.92 | 8.0.92 | 8.0.92 | 8.0.95 | 8.0.92 | 8.0.92 | 8.0.92 |
| IEEE 802.3bz | No | No | No | 8.0.95 | 8.0.7010 | No | 8.0.90 |
| Default username and password
Note: Applicable to new
ICX switches that are initially deployed using the 08.0.90
release.
|
8.0.90 | 8.0.90 | 8.0.90 | 8.0.95 | 8.0.90 | 8.0.90 | 8.0.90 |
| Forwarding profiles | No | No | No | 8.0.95 | No | No | 8.0.90 |
| Automation with Ansible | 8.0.91 | 8.0.91 | 8.0.91 | 8.0.95 | 8.0.91 | 8.0.92 | 8.0.91 |
| Ruckus SmartZone management of ICX
7xxx switches (monitoring, customized thresholds, remote ping,
traceroute)
|
8.0.80 | 8.0.80 | 8.0.80 | 8.0.95 | 8.0.80 | 8.0.80 | 8.0.90 |
| Ruckus SmartZone management of ICX 7xxx switches (ICX configuration from SmartZone) | 8.0.90 | 8.0.90 | 8.0.90 | 8.0.95 | 8.0.90 | 8.0.90 | 8.0.90 |
| FQDN Support for Switch Registrar | 8.0.92 | 8.0.92 | 8.0.92 | 8.0.95 | 8.0.92 | 8.0.92 | 8.0.92 |
| ICX Source IP for SmartZone Communication | 8.0.92 | 8.0.92 | 8.0.92 | 8.0.95 | 8.0.92 | 8.0.92 | 8.0.92 |
| ICX Management in Ruckus Cloud | 8.0.92b11 | No | No | 8.0.95 | 8.0.92b11 | No | 8.0.92b11 |
- Supported only on ICX 7150-48ZP. ↩
- 7550 Supported only on ICX 7550-24ZP, ICX 7550-48ZP ↩
- 7650 Supported only on ICX 7650-48ZP. ↩
- Supported ony on ICX 7150-C10ZP. ↩
- Supported only on ICX 7850-48F ↩
- Only for copper ports. Fiber ports are not supported. ↩
- The ICX 7150-C08P does not support an out-of-the-box management port. ↩
- No support for flow-unaware mode. ↩
- Supported only on the ICX 7150-24P and the ICX 7150-48P. ↩
- Supported on the ICX 7650-48ZP only ↩
- ICX switches running 08.0.90d and above can be discovered by Ruckus Cloud. Ruckus Cloud automatically upgrades these switches to 08.0.92b release. ↩