Configure WLAN

Configure the WLAN to enable web passthrough and allow the preauthentication ACL created in the previous step.
  1. On the Cisco WLAN Controller, under WLANs, edit the WLAN to use for the passthrough.

    Edit WLANs

  2. Select the Security tab and the Layer 3 tab.
  3. In the Layer 3 Security section, check the Web Policy box and select Passthrough. Leave Layer 3 Security at None.
  4. Set the Preauthentication ACL. Leave Email Input unchecked.
  5. Apply changes.
Parent topic: Configuring the Cisco WLC for Web Passthrough