Configuring TACACS+ in the Cloudpath Administration UI
In this section:
- Configuration OverviewAll TACACS+ configuration information can be entered in the Cloudpath UI.
- Enabling TACACS+TACACS+ is disabled by default, so you must first enable the setting in the Cloudpath UI.
- Configuring an Authentication BackendAn LDAP server is required for TACACS+ authentication for external users and groups. Both LDAP over SSL (LDAPS) and LDAP over TLS are supported.
- Configuring TACACS+ DevicesYou can add one or more devices that can be authenticated by the TACACS+ server.
- Configuring Time RangesYou can add one or more time ranges (called time specs in the UI) to your TACACS+ configuration. Time specs allow you to further manage control of the various devices that can use the TACACS+ server by applying time specs to access control lists (ACLs).
- Configuring Access Control ListsYou can add one or more access control lists (ACLs) to your TACACS+ configuration. ACLs allow you to further manage control of the various devices that can use the TACACS+ server by applying ACLs to user groups and individual users.
- Configuring TACACS+ ServicesA service allows you to define a set of access rules (such as privilege levels and accessible commands) that can then be assigned to user groups or specific users.
- Configuring TACACS+ GroupsYou can add one or more user groups to your TACACS+ configuration.
- Configuring TACACS+ UsersYou can add one or more users to your TACACS+ configuration. The reason to add individual users would be if the users do not belong to a group that already exists in your LDAP server.
- Creating Configuration ProfilesA configuration profile acts as a set of definitions that instruct the TACACS+ server how to manage users and devices. Such a profile contains any combination of already configured TACACS+ server entities, such as authentication backends, devices, groups and users, and so on.
- Checking and Changing TACACS+ Server Status
and Gathering Log InformationYou can check the status of the TACACS+ server and gather log information in the same screen in the UI.