Client Configuration Requirements
Refer to the documentation for each device, but keep in mind the following information that you will need to know when configuring the device:
- Port 49 (or a different port number that you configured in the Cloudpath TACACS+ Server Settings) is used for the connection between the device and the Cloudpath TACACS+ server.
- The IP Address to enter for the TACACS+ server is the IP address of your Cloupdath system.
- A shared secret or shared key that is requested on the device-side configuration will also need to be entered during the Cloudpath TACACS+ server device configuration.
For RUCKUS controller and device documentation, go to: https://support.ruckuswireless.com/.
For information about configuring the AAA server for a RUCKUS ICX switch as a TACACS+ server, see the RUCKUS FastIron Security Configuration Guide, "TACACS+ Server Authentication" chapter.
For information about configuring the AAA server for a RUCKUS SmartZone Controller, see the RUCKUS SmartZone Controller Administration Guide, "Working with AAA Servers."