Mounting the Compact Device Under a Fixed Surface

Use the following items to mount the device under a fixed surface such as a desk or shelf.

  • #2 Phillips screwdriver
  • Hammer
  • Drill
  • Mounting anchors
  • Wall/under desk mount kit (ICX7000-C12-WMK: short brackets) or two-post rack mount kit (ICX7000-C12-RMK: long or ICX 7150-C10ZP-RMK brackets)
  • Mounting screws
Danger: When mounting the device under a fixed surface, under a desk, or under a shelf, mount the device with the bottom panel down and in a place where there is not much foot traffic. The fixed surface must be strong enough to withstand the weight of the device such that the device or the surface does not fall down.
Caution: When mounting the device under a fixed surface, under a desk, or under a shelf, use the long brackets to provide adequate ventilation and not exceed the operating temperature.
Caution: Do not install the device in an environment where the operating ambient temperature might exceed 35°C (95°F).

Complete the following steps to mount the device under a fixed surface.

  1. Using a Phillips screwdriver, attach the mounting brackets to the diagonally opposite sides of the device using four M4L8 Pan-head screws on each side.

    Mounting a Compact Device Under a Fixed Surface with Short Brackets (ICX7000-C12-WMK)

    1. Wall-mount screws (screw, M4-16 x 25 mm, pan-head Phillips) 2. Wall-mount anchors (plastic screw retainer, 2.9 mm x 25 mm)

    Mounting a Compact Device Under a Fixed Surface with Long Brackets (ICX7000-C12-RMK or ICX 7150-C10ZP-RMK)

  2. Drill two holes under the fixed surface or desk where you want to mount the device.
  3. Hammer the mounting anchors into the two holes.
  4. With the bottom panel of the device facing down, use the #2 Phillips screwdriver to secure the two mounting screws into the mounting anchors.
Parent topic: Mounting the Device