web-management
web-management
[
enable
{
vlan
vlan-id
|
ethernet
unit/slot/port
[
to
unit/slot/port
|
[
ethernet
unit/slot/port
to
unit/slot/port
|
ethernet
unit/slot/port
]...
]
}
]
no web-management
[
enable
{
vlan
vlan-id
|
ethernet
unit/slot/port
[
to
unit/slot/port
|
[
ethernet
unit/slot/port
to
unit/slot/port
|
ethernet
unit/slot/port
]...
]
}
]
web-management
[
allow-no-password
|
connection-receive-timeout
timeout-value
|
frame
{
bottom
|
front-panel
|
menu
}
|
hp-top-tools
|
http
|
https
|
list-menu
|
page-menu
|
page-size
size
|
session-timeout
time
|
tcp-port
port-num
]
no web-management
[
allow-no-password
|
connection-receive-timeout
timeout-value
|
frame
{
bottom
|
front-panel
|
menu
}
|
hp-top-tools
|
http
|
https
|
list-menu
|
page-menu
|
page-size
size
|
session-timeout
time
|
tcp-port
port-num
]
web-management
[
refresh
{
front-panel
|
port-statistic
|
rmon
|
stp
|
tftp
}
refresh-time
]
no web-management
[
refresh
{
front-panel
|
port-statistic
|
rmon
|
stp
|
tftp
}
refresh-time
]
Web management is enabled.
Global configuration mode
The
no form of the command removes the web management configurations.
In FastIron release 08.0.92, use of the web-management command on ICX 7150-C08PT devices is restricted to the following syntax: web-management { http | https }. HTTP and HTTPS are disabled by default (as "no web-management http" configuration) on ICX 7150-COPT devices, unlike on other ICX platforms, where HTTP and HTTPS are enabled by default. The command options allow ICX 7150-C08PT devices to enable or disable HTTP or HTTPS ports if necessary as a pre-requisite to enabling or disabling web authentication; however, no other web-management functions are supported on ICX 7150-C08PT devices. If you attempt to manage the devices from a web interface, an error page displays the message "Web-management support is not available for this device." HTTP and HTTPS remain available for other services such as web authentication.
The following example shows how to enable web management for HTTPS access.
device(config)# web-management https
The following example shows how to enable web management access only to clients connected to ports within port-based VLAN 10.
device(config)# web-management enable vlan 10
The following example shows how to enable web management access on a range of Ethernet interfaces.
device(config)# web-management enable ethernet 1/1/1 to 1/2/3
| Release version | Command history |
|---|---|
| 08.0.92 | This command was modified for ICX 7150-C08PT devices to restrict command options to HTTP and HTTPS only. |