system-max ip-route

Increases the capacity of the IP route table.
Syntax
system-max ip-route number
no system-max ip-route number
Command Default

The default is 12000 for ICX 7250 and ICX 7450 devices and 98304 for ICX 7750 and ICX 7650 devices.

Parameters
number
The maximum number of routes in the IP route table.
Modes

Global configuration mode

Usage Guidelines

For ICX 7850 and ICX 7550 devices, values are used from the forwarding profile and there is no option to change these values. When a new profile is selected, the values from the new profile are applied. Refer to the forwarding-profile command for more information.

The supported ranges and defaults for IP routes vary by platform:

Product Default number of IP routes Supported range
ICX 7250 12000 4096 to 15168
ICX 7450 12000 4096 to 15168
ICX 7650 98304 98304 to 131072
ICX 7750 98304 98304 to 131072

You must save the configuration and reload the software to place the system maximum change into effect.

The no form of the command resets the values to the default.

Examples

The following example increases the capacity of the IP route table: 

device# configure terminal
device(config)# system-max ip-route 5000
device(config)# write memory
device(config)# exit
device# reload
Parent topic: Commands Si - Z