vsrp auth-type
Configures a simple text-string as a password in packets sent on the interface.
Syntax
vsrp
auth-type
{
no-auth
|
simple-text-auth
password
}
no vsrp
auth-type
{
no-auth
|
simple-text-auth
password}
Command Default
By default, no authentication is configured.
Parameters
Modes
VLAN configuration mode
Usage Guidelines
If the interfaces on which you configure the VRID use authentication, the VSRP packets on those interfaces also must use the same authentication.
- No authentication - The interfaces do not use authentication.
- Simple - The interfaces use a simple text-string as a password in packets sent on the interface. If the interfaces use simple password authentication, the VRID configured on the interfaces must use the same authentication type and the same password.