Commands Si - Z

• 1 Commands Si - Z
  • 1.1 site (VXLAN)
  • 1.2 slow-start
  • 1.3 slow-path-forwarding
  • 1.4 snmp-client
  • 1.5 snmp-server
  • 1.6 snmp-server community
  • 1.7 snmp-server contact
  • 1.8 snmp-server disable
  • 1.9 snmp-server enable
  • 1.10 snmp-server enable mib
  • 1.11 snmp-server enable traps
  • 1.12 snmp-server enable traps holddown-time
  • 1.13 snmp-server enable traps mac-notification
  • 1.14 snmp-server engineid local
  • 1.15 snmp-server group
  • 1.16 snmp-server host
  • 1.17 snmp-server legacy
  • 1.18 snmp-server location
  • 1.19 snmp-server max-ifindex-per-module
  • 1.20 snmp-server preserve-statistics
  • 1.21 snmp-server pw-check
  • 1.22 snmp-server trap-source
  • 1.23 snmp-server user
  • 1.24 snmp-server view
  • 1.25 source-guard enable
  • 1.26 source-interface
  • 1.27 source-ip
  • 1.28 spanning-tree
  • 1.29 spanning-tree (Ethernet, LAG)
  • 1.30 spanning-tree 802-1w
  • 1.31 spanning-tree 802-1w ethernet
  • 1.32 spanning-tree designated-protect
  • 1.33 spanning-tree path-cost-method
  • 1.34 spanning-tree root-protect
  • 1.35 spanning-tree rstp
  • 1.36 speed-duplex
  • 1.37 spt-threshold
  • 1.38 spx allow-pe-movement
  • 1.39 spx cb-configure
  • 1.40 spx cb-enable
  • 1.41 spx interactive-setup
  • 1.42 spx pe-enable
  • 1.43 spx ping
  • 1.44 spx suggested-id
  • 1.45 spx unconfigure
  • 1.46 spx unit
  • 1.47 spx zero-touch-deny
  • 1.48 spx-lag
  • 1.49 spx-mon enable
  • 1.50 spx-port
  • 1.51 ssh
  • 1.52 ssh access-group
  • 1.53 ssm-enable
  • 1.54 stack disable
  • 1.55 stack enable
  • 1.56 stack interactive-setup
  • 1.57 stack mac
  • 1.58 stack suggested-id
  • 1.59 stack suppress-warning
  • 1.60 stack switch-over
  • 1.61 stack unconfigure
  • 1.62 stack zero-touch-enable
  • 1.63 stack-port
  • 1.64 stack-trunk
  • 1.65 static-mac-address
  • 1.66 static-mac-ip-mapping
  • 1.67 store-and-forward
  • 1.68 stp-bpdu-guard
  • 1.69 stp-group
  • 1.70 stp-protect
  • 1.71 subnet6 (DHCPv6)
  • 1.72 summary-address (OSPFv2)
  • 1.73 summary-address (OSPFv3)
  • 1.74 supportsave (SCP)
  • 1.75 switch-over-active-role
  • 1.76 symmetric-flow-control enable
  • 1.77 symmetric-flow-control set
  • 1.78 symmetrical-flow-control enable
  • 1.79 system-max gre-tunnels
  • 1.80 system-max igmp-snoop-group-addr
  • 1.81 system-max igmp-snoop-mcache
  • 1.82 system-max ip-arp
  • 1.83 system-max ip-cache
  • 1.84 system-max ip-route
  • 1.85 system-max ip-route-default-vrf
  • 1.86 system-max ip-route-vrf
  • 1.87 system-max ip-static-arp
  • 1.88 system-max ip-subnet-port
  • 1.89 system-max ip-vrf
  • 1.90 system-max ip6-cache
  • 1.91 system-max ip6-neighbor
  • 1.92 system-max ip6-route
  • 1.93 system-max ip6-route-default-vrf
  • 1.94 system-max ip6-route-vrf
  • 1.95 system-max l3-interface
  • 1.96 system-max mac
  • 1.97 system-max mac-notification-buffer
  • 1.98 system-max max-ecmp
  • 1.99 system-max max-ip-mac
  • 1.100 system-max mld-snoop-group-addr
  • 1.101 system-max mld-snoop-mcache
  • 1.102 system-max msdp-sa-cache
  • 1.103 system-max openflow-flow-entries
  • 1.104 system-max openflow-pvlan-entries
  • 1.105 system-max openflow-unprotectedvlan-entries
  • 1.106 system-max pim-hw-mcache
  • 1.107 system-max pim6-hw-mcache
  • 1.108 system-max pms-global-pool
  • 1.109 system-max rmon-entries
  • 1.110 system-max spanning-tree
  • 1.111 system-max view
  • 1.112 system-max virtual-interface
  • 1.113 system-max vlan
  • 1.122 table-map
  • 1.123 tacacs-server deadtime
  • 1.124 tacacs-server enable
  • 1.125 tacacs-server host
  • 1.126 tacacs-server key
  • 1.127 tacacs-server retransmit
  • 1.128 tacacs-server timeout
  • 1.129 tag-profile
  • 1.130 tag-profile enable
  • 1.131 tagged ethernet
  • 1.132 tagged lag
  • 1.133 telnet
  • 1.134 telnet access-group
  • 1.135 telnet client
  • 1.136 telnet login-retries
  • 1.137 telnet login-timeout
  • 1.138 telnet server enable
  • 1.139 telnet server suppress-reject-message
  • 1.140 telnet strict-management-vrf
  • 1.141 telnet timeout
  • 1.142 temperature warning
  • 1.143 terminal logging
  • 1.144 terminal monitor
  • 1.145 tftp client enable
  • 1.146 tftp disable
  • 1.147 tftp-server
  • 1.148 tftp-server (Image)
  • 1.149 timeout (EFM-OAM)
  • 1.150 timers (BGP)
  • 1.151 timers (OSPFv2)
  • 1.152 timers (OSPFv3)
  • 1.153 timers (RIP)
  • 1.154 timers (RIPng)
  • 1.155 tolerance
  • 1.156 topology-group
  • 1.157 traceroute
  • 1.158 track-port
  • 1.159 track-port (VSRP)
  • 1.160 traffic-policy count
  • 1.161 traffic-policy rate-limit adaptive
  • 1.162 traffic-policy rate-limit fixed
  • 1.163 transform
  • 1.164 trunk-threshold
  • 1.165 trust dscp
  • 1.166 trust-port
  • 1.167 tunnel destination
  • 1.168 tunnel mode gre ip
  • 1.169 tunnel mode ipsec
  • 1.170 tunnel mode ipv6ip
  • 1.171 tunnel path-mtu-discovery
  • 1.172 tunnel protection ipsec profile
  • 1.173 tunnel source
  • 1.174 tunnel tos
  • 1.175 tunnel vrf
  • 1.176 unit-name (Stacking)
  • 1.177 unknown-unicast limit
  • 1.178 unmount disk0
  • 1.179 untagged
  • 1.180 update-lag-name
  • 1.181 update-time (BGP)
  • 1.182 update-time (RIP)
  • 1.183 use-radius-server
  • 1.184 use-v2-checksum
  • 1.185 use-vrrp-path (RIP)
  • 1.186 username
  • 1.187 username (Local Database)
  • 1.188 valid-lifetime (DHCPv6)
  • 1.189 vendor-class
  • 1.190 verify
  • 1.191 verify device-key
  • 1.192 version
  • 1.193 violation
  • 1.194 virtual-ip
  • 1.195 virtual-port
  • 1.196 vlan
  • 1.197 vlan-config
  • 1.198 vlan-group
  • 1.199 voice-vlan
  • 1.200 vrf
  • 1.201 vrf forwarding
  • 1.202 vsrp
  • 1.203 vsrp auth-type
  • 1.204 vsrp-aware
  • 1.205 web access-group
  • 1.206 web client
  • 1.207 web-management
  • 1.208 webauth
  • 1.209 webauth-redirect-address
  • 1.210 webpage custom-text
  • 1.211 webpage logo
  • 1.212 webpage terms
  • 1.213 wpad
  • 1.214 write terminal
  • 1.215 xwindow-manager
  • 1.216 zero-touch-enable
  • 1.217 zero-touch-ports