Configuring a TFTP server for Campus Fabric (SPX) auto image copy

You can designate a TFTP server from which the auto image copy process downloads the correct PE image to a mismatched unit.

The requisite PE image must be stored on an accessible TFTP server, and the auto image copy process must be enabled for the Campus Fabric domain.

The IP address of the TFTP server can be configured in advance, or you can provide the IP address when prompted during the auto image copy process if it has not been pre-configured.
  1. Enter global configuration mode. 
    device# configure terminal
  2. Run the tftp-server command. The following example designates the image location on the server with the IP address 10.70.42.172 in the builds folder under the server directory. 
    device(config)# tftp-server 10.70.42.172 image-location /server/builds/
Parent topic: Campus Fabric (SPX) image upgrade