Campus Fabric Management

• 1 Campus Fabric Management
  • 1.1 Logging in through the console port
  • 1.2 Using the remote CB console
    • 1.2.1 PE console port behavior
  • 1.3 Changing the speed on an SPX link
    • 1.3.1 Converting 1-Gbps SPX links on downstream PEs to 10-Gbps links
    • 1.3.2 Converting attached PE candidate speed by physically disconnecting the units
  • 1.4 Handling nonoperational PE units
  • 1.5 Assigning an ID to a PE unit
    • 1.5.1 Assigning a PE ID that has been taken
  • 1.6 Replacing a PE unit
  • 1.7 Replacing PE units with the zero-touch or SPX interactive utility
  • 1.8 Moving a PE unit and retaining its ID (manual methods)
    • 1.8.1 Method 1: Prepare a new topology by reconfiguring PE IDs on the CB
    • 1.8.2 Method 2: Allow suggested ID or previous unit ID assignment
  • 1.9 Removing a PE ring and its configuration
  • 1.10 Configuring SPX ports and LAGs on a live system
  • 1.11 Campus Fabric (SPX) image upgrade
    • 1.11.1 Disabling or re-enabling the auto image copy process for a Campus Fabric (SPX) configuration
    • 1.11.2 Configuring a TFTP server for Campus Fabric (SPX) auto image copy
    • 1.11.3 Manual upgrade of Campus Fabric (SPX) images using a manifest file
  • 1.12 Unconfiguring the CB stack or PE units
  • 1.13 CB stack merges and breaks
  • 1.14 Displaying Campus Fabric (SPX) information
    • 1.14.1 SPX information in show running-config output
    • 1.14.2 SPX information in show configuration command output
    • 1.14.3 Displaying regular mode configuration from a PE unit
    • 1.14.4 Displaying information with the show spx command
    • 1.14.5 Using show commands for operational analysis
  • 1.15 Campus Fabric mirroring overview
    • 1.15.1 Mirroring in a Campus Fabric domain
  • 1.16 MIB support for Campus Fabric 802.1br SPX configurations