ntp-server

Creates the NTP server configuration.
Syntax
ntp-server ntp-server
Command Default

No NTP server is specified.

Parameters
ntp-server
Sets the NTP server IP address or domain name.
Modes

Global configuration mode

Usage Guidelines

This command is supported on all platforms except SmartZone Data Plane. The controller has three external Network Time Protocol (NTP) servers that are used to synchronize the time across Access Points, Cluster nodes, and vSZ-DPs.

Examples

The following example to set the NTP server configuration. 

device# config
device(config)# ntp-server 10.174.84.201
<cr>
Parent topic: Commands J through N