Find Technical Content
  • Home
  • Ruckus Support Portal
  • Ruckus Networks
  • Table of Contents
  • Dark Mode

Powered by Titania Delivery

⚠ This cached page may be outdated. Click refresh to get the latest content.
Cached Version You are Offline

You are viewing a cached version of this page.

You are currently offline. This page was loaded from cache.

Network Time Protocol Version 4 (NTPv4)

  • 1 Network Time Protocol Version 4 (NTPv4)
    • 1.1 Network Time Protocol Version 4 Overview
      • 1.1.1 Limitations
      • 1.1.2 Network Time Protocol leap second
        • 1.1.2.1 How Ruckus supports leap second handling for NTP
      • 1.1.3 NTP server
        • 1.1.3.1 System as an Authoritative NTP Server
      • 1.1.4 NTP Client
      • 1.1.5 NTP peer
      • 1.1.6 NTP broadcast server
      • 1.1.7 NTP broadcast client
      • 1.1.8 NTP associations
        • 1.1.8.1 NTP poll-based associations
        • 1.1.8.2 NTP broadcast-based associations
      • 1.1.9 Synchronizing time
      • 1.1.10 Authentication
      • 1.1.11 NTP and a Configured VLAN
    • 1.2 Configuring NTP
      • 1.2.1 Enabling NTP
      • 1.2.2 Disabling NTP
      • 1.2.3 NTP Server Start Delay
      • 1.2.4 Enabling NTP Authentication
      • 1.2.5 Defining an Authentication Key
      • 1.2.6 Specifying a Source Interface
      • 1.2.7 Enabling or Disabling the VLAN Containment for NTP
      • 1.2.8 Configuring the NTP Client
      • 1.2.9 Configuring the Master
      • 1.2.10 Configuring the NTP Peer
      • 1.2.11 Configuring NTP on an Interface
      • 1.2.12 Configuring the Broadcast Client
      • 1.2.13 Configuring the Broadcast Destination
      • 1.2.14 Displaying NTP Status
      • 1.2.15 Displaying NTP Association Information
      • 1.2.16 Displaying NTP Association Details
      • 1.2.17 NTP Client Mode Configuration Example
      • 1.2.18 NTP Client Mode Configuration Example
      • 1.2.19 NTP Strict Authentication Configuration Example
      • 1.2.20 NTP Loose Authentication Configuration Example
      • 1.2.21 NTP Interface Context for the Broadcast Server or Client Mode Example
      • 1.2.22 NTP Broadcast Client Configuration Example
      • 1.2.23 NTP over Management VRF
        • 1.2.23.1 NTP over Management VRF Limitations
        • 1.2.23.2 Configuring NTP over Management VRF on an NTP Server
        • 1.2.23.3 Configuring NTP over Management VRF on an NTP Client
        • 1.2.23.4 Configuration Example for NTP over Management VRF Using IPv6

Network Time Protocol Version 4 (NTPv4)

In this section:

  1. Network Time Protocol Version 4 Overview
  2. Configuring NTP

Did you find what you were looking for?

Thanks!

Ruckus Wireless

© 2026 Ruckus Wireless LLC All rights reserved.

  • Accessibility
  • Privacy & Cookies
  • Do Not Sell My Information
  • Trademarks
  • Terms
  • Feedback