Network Time Protocol Version 4 (NTPv4)

• 1 Network Time Protocol Version 4 (NTPv4)
  • 1.1 Network Time Protocol Version 4 Overview
    • 1.1.1 Limitations
    • 1.1.2 Network Time Protocol leap second
      • 1.1.2.1 How Ruckus supports leap second handling for NTP
    • 1.1.3 NTP server
      • 1.1.3.1 System as an Authoritative NTP Server
    • 1.1.4 NTP Client
    • 1.1.5 NTP peer
    • 1.1.6 NTP broadcast server
    • 1.1.7 NTP broadcast client
    • 1.1.8 NTP associations
      • 1.1.8.1 NTP poll-based associations
      • 1.1.8.2 NTP broadcast-based associations
    • 1.1.9 Synchronizing time
    • 1.1.10 Authentication
    • 1.1.11 NTP and a Configured VLAN
  • 1.2 Configuring NTP
    • 1.2.1 Enabling NTP
    • 1.2.2 Disabling NTP
    • 1.2.3 NTP Server Start Delay
    • 1.2.4 Enabling NTP Authentication
    • 1.2.5 Defining an Authentication Key
    • 1.2.6 Specifying a Source Interface
    • 1.2.7 Enabling or Disabling the VLAN Containment for NTP
    • 1.2.8 Configuring the NTP Client
    • 1.2.9 Configuring the Master
    • 1.2.10 Configuring the NTP Peer
    • 1.2.11 Configuring NTP on an Interface
    • 1.2.12 Configuring the Broadcast Client
    • 1.2.13 Configuring the Broadcast Destination
    • 1.2.14 Displaying NTP Status
    • 1.2.15 Displaying NTP Association Information
    • 1.2.16 Displaying NTP Association Details
    • 1.2.17 NTP Client Mode Configuration Example
    • 1.2.18 NTP Client Mode Configuration Example
    • 1.2.19 NTP Strict Authentication Configuration Example
    • 1.2.20 NTP Loose Authentication Configuration Example
    • 1.2.21 NTP Interface Context for the Broadcast Server or Client Mode Example
    • 1.2.22 NTP Broadcast Client Configuration Example
    • 1.2.23 NTP over Management VRF
      • 1.2.23.1 NTP over Management VRF Limitations
      • 1.2.23.2 Configuring NTP over Management VRF on an NTP Server
      • 1.2.23.3 Configuring NTP over Management VRF on an NTP Client
      • 1.2.23.4 Configuration Example for NTP over Management VRF Using IPv6