Use the show ntp associations
command to display detailed association information for the NTP server or peers.
device# show ntp associations
address ref clock st when poll reach delay offset disp
*~172.19.69.1 172.24.114.33 3 25 64 3 2.89 0.234 39377
~2001:235::234
INIT 16 - 64 0 0.00 0.000 15937
* synced, # selected, + candidate, - outlayer, x falseticker, ~ configured
The following table provides
descriptions of the show ntp
associations command output.
show ntp associations
Command Output
|
Field
|
Description
|
|
*
|
The peer has been
declared the system peer and lends its variables to the system
variables.
|
|
#
|
This peer is a
survivor in the selection algorithm.
|
|
+
|
This peer is a
candidate in the combine algorithm.
|
|
-
|
This peer is
discarded as outlier in the clustering algorithm.
|
|
x
|
This peer is
discarded as a 'falsticker' in the selection algorithm.
|
|
~
|
The server or peer is
statically configured.
|
|
address
|
IPv4 or IPv6 address
of the peer.
|
|
ref clock
|
IPv4 address or first
32 bits of the MD5 hash of the IPv6 address of the peer to which the
clock is synchronized.
|
|
St
|
Stratum setting for
the peer.
|
|
when
|
Time, in seconds,
since last NTP packet was received from peer.
|
|
poll
|
Polling interval
(seconds).
|
|
reach
|
Peer reachability
(bit string, in octal).
|
|
delay
|
Round-trip delay to
the peer, in milliseconds.
|
|
offset
|
Relative time
difference between a peer clock and a local clock, in milliseconds.
|
|
disp
|
Dispersion.
|