Removing a Port from a Currently Operational LAG

Ports can be deleted from a currently operational LAG. However, when deleting ports from an operational LAG, you must consider the following limitations:

If deleting a port will result in the trunk threshold value becoming greater than the number of ports in the LAG, the port deletion will be rejected.

When you remove a port from an operational LAG, the port is disabled automatically.

Complete the following steps to remove a port from a LAG.

Enter the global configuration mode.
```
device# configure terminal
```

Create a LAG.
```
device(config)# lag blue static id 1
```

Add ports to the LAG.

device(config-lag-blue)# ports ethernet 1/3/1 ethernet 1/3/2

Remove a port from the LAG.
```
device(config-lag-blue)# no ports ethernet 1/3/1 
```
To enable a port belonging to a keep-alive LAG, you must enable it from the interface configuration level.
```
device(config-lag-test)# interface ethernet 1/7/8
device(config-if-e1000-1/7/8)# enable
device(config-if-e1000-1/7/8)#
```

Link Aggregation Group

Removing a Port from a Currently Operational LAG